hoopie

How to Embroider a Sweater by Hand (Knit Jumpers and Cardigans)

Hand embroider a knit sweater or cardigan: stabiliser on knits, wool or floss, transferring designs onto textured fabric and the best stitches to use.

By Ayoub Farid · · 2 min read

Embroidered knitwear (a flower on a cardigan, a word across a jumper, little hearts on the cuffs) is a cosy trend that's easy to do by hand. Knits are stretchy and textured, so the trick is stabilising the fabric and choosing bold stitches.

What you need

  • A knit sweater or cardigan (medium knit; very chunky knits are harder)
  • Water-soluble stabiliser printed or drawn with your design (essential on knits)
  • Wool embroidery thread, tapestry wool or 6 strands of floss
  • A chenille or tapestry needle with a large eye (a blunt tip slides between knit stitches without splitting them)
  • An optional iron-on, knit-friendly stabiliser for the inside

Step 1: Stabilise

Stick or tack water-soluble stabiliser with your design onto the front. For fine knits, also add a soft stabiliser inside. This stops the knit stretching and gives you lines to follow.

Step 2: Don't hoop tightly

A hoop can stretch knits out of shape. Either stitch without a hoop, or use a large hoop placed gently, with no stretching.

Step 3: Choose bold stitches

StitchWhy
Chain stitchBold, sits well on texture
Lazy daisyQuick flowers
French knotsTexture and centres
CouchingLay thick yarn for smooth lines
Satin stitchSmall shapes only
Back stitchOutlines with thick thread

Avoid tiny, fine stitches; they sink into the knit.

Step 4: Watch tension

Pull gently. Tight stitches pucker knits immediately. Check by gently stretching the area: the embroidery should flex with it a little.

Step 5: Finish

Rinse away the water-soluble stabiliser, lay the sweater flat to dry, and weave ends in securely on the inside.

Design ideas

More in embroidery on clothes.

Common sweater embroidery problems

ProblemFix
Stitches disappear into the knitUse thicker thread and bolder stitches
Area puckers after washingRelax tension; use a knit-friendly stabiliser inside
Needle splits the yarnUse a blunt tapestry needle
Design distortsDon't stretch the knit when hooping or stitching

Choosing a sweater

Smooth, medium-gauge knits in cotton or wool blends are easiest. Very chunky cable knits and fluffy mohair are harder to stitch on and hide fine designs. Test on a less precious sweater first.

Frequently asked questions

Can you embroider on a knit sweater?

Yes. Use water-soluble stabiliser, a blunt large-eye needle, thick thread and gentle tension.

What thread is best for embroidering sweaters?

Wool embroidery thread or six strands of cotton floss.

Do I need a hoop to embroider a sweater?

Not necessarily; hoops can stretch knits. Stabiliser does most of the work.

How do I wash an embroidered sweater?

Follow the sweater's care label; usually hand wash cold and dry flat.

Keep reading