How to Finish the Back of an Embroidery Hoop for Display
Three ways to finish the back of an embroidery hoop: running stitch gather, glue, and felt backing. Turn your finished embroidery into neat wall art.
By Ayoub Farid · · 2 min read
Once your design is done, the hoop itself becomes the frame. Finishing the back hides the fabric edges and thread tails, and makes the piece look professional on a wall or as a gift.
Before you start
- Wash out pen lines if you used a water-soluble pen, then let the fabric dry.
- Press the fabric face down on a towel with a warm iron, so you don't flatten the stitches.
- Re-hoop it in the display hoop: centred, drum-tight, with the screw at the top.
- Trim the excess fabric to about 3–4 cm around the hoop.
Method 1: Running stitch gather (no glue)
- Thread a needle with strong thread or 3 strands of floss.
- Sew a running stitch all the way around the edge of the excess fabric, about 1 cm from the edge.
- Pull the thread like a drawstring so the fabric gathers over the back of the inner ring.
- Tie off securely.
Pros: no glue, reversible.
Method 2: Glue
- Trim the excess fabric to about 1.5 cm.
- Run a thin line of fabric glue or hot glue along the inside edge of the inner ring.
- Press the fabric onto it, folding as you go.
Pros: fast and flat. Cons: permanent; hot glue can show through thin fabric.
Method 3: Felt backing (neatest)
- Do Method 1 or 2 first.
- Cut a felt circle the size of the inner ring (trace the ring).
- Place it over the back and sew it to the gathered fabric with small whip stitches or blanket stitch.
You can also add a label: your name, the date, the recipient.
Hanging
The hoop's screw doubles as a hanger. Add a ribbon loop or hang it directly on a nail. For a group of hoops, arrange them on paper on the floor first, then copy the layout to the wall.
Other display options
- Picture frame: see how to frame embroidery.
- Painted or wrapped hoops: paint the outer ring or wrap it in ribbon before mounting.
- Ornaments: small hoops finished with felt make lovely Christmas ornaments.
Ideas for what to put in the hoop: embroidery hoop art ideas.
Frequently asked questions
How do you finish the back of an embroidery hoop?
Trim the fabric, gather it with a running stitch or glue it to the inner ring, then cover it with a felt circle.
Should I glue or sew my embroidery hoop back?
Sewing (running stitch gather) is reversible and gentle. Glue is quicker but permanent.
Do I need to remove pen marks before finishing?
Yes. Wash out water-soluble pen before finishing, as heat or time can set the marks.
How do I hang an embroidery hoop?
Use the screw at the top as a hanger, or add a ribbon loop.