hoopie

How to Frame Embroidery: Hoops, Picture Frames and More

How to frame hand embroidery: display it in the hoop, mount it in a picture frame, lace it over card, or turn it into a pillow, patch or ornament.

By Ayoub Farid · · 2 min read

Finished a piece? Here are the best ways to display it, from the simplest (keep it in the hoop) to a classic picture frame.

Option 1: Keep it in the hoop

The quickest and most popular. Move it to a clean display hoop, centre the design, trim and finish the back. Full steps in how to finish an embroidery hoop.

Tip: paint the outer ring, wrap it in ribbon, or use a coloured hoop to match your room.

Option 2: Picture frame

Mount the fabric

  1. Cut a piece of acid-free foam board or mount board to fit the frame's opening.
  2. Centre the embroidery on the board.
  3. Fold the edges to the back and secure them with:

- Lacing: sew long stitches across the back, side to side then top to bottom, pulling the fabric taut (the traditional method), or - Pins into the edge of foam board, or - Acid-free double-sided tape for small pieces.

Frame it

  • Glass or no glass? Glass protects from dust but flattens raised stitches if it touches them. Use a mat or spacers to keep the glass off the stitching.
  • Mat board adds a clean border and space between glass and stitches.

Option 3: Stretched canvas

Wrap the embroidery around a small stretched canvas and staple at the back, like a painting. Modern and lightweight.

Option 4: Turn it into something useful

Protecting framed embroidery

  • Keep it out of direct sunlight to prevent fading.
  • Avoid humid rooms like bathrooms.
  • Dust gently with a soft brush.

For a wall of hoops, see embroidery hoop art ideas.

Choosing between hoop and frame

HoopPicture frame
CostLowHigher
TimeQuickLonger to mount
LookCasual, craftyFormal, gallery
Dust protectionNoneWith glass
Best forModern hoop art, giftsHeirlooms, samplers, detailed work

Preparing embroidery for framing

  1. Remove all pen marks.
  2. Press from the back on a towel.
  3. Check the back for loose tails and trim them.
  4. Leave at least 5 cm of fabric around the design for folding over the board.

Frequently asked questions

Should I frame embroidery with glass?

It's optional. Glass protects from dust, but use a mat or spacers so it doesn't press on the stitches.

How do I keep embroidery tight in a frame?

Lace or pin the fabric taut over acid-free board before framing.

Can I leave embroidery in the hoop?

Yes. Finished hoops are a classic way to display embroidery.

Do I need to wash embroidery before framing?

Only to remove pen marks or dirt. Always press it from the back first.

Keep reading